AMSOIL Synthetic PC-Series Compressor Oils

AMSOIL PC Series Synthetic Compressor Oils are longlife, premium compressor lubricants based on novel, proprietary technology. They incorporate the highest quality, thermally-stable PAO synthetics fortified with premium non-detergent, ashless additives for maximum protection at high temperatures and pressures. They last up to eight times longer than petroleum oils, effectively reducing maintenance and waste oil disposal costs. The correct manufacturer-recommended viscosity grade of AMSOIL PC Series compressor oil is recommended for use in rotary screw, rotary vane, reciprocating and other compressor applications. They are compatible with PAO-, ester- and petroleum-based compressor oils. (They are not compatible with glycol- or silicone-based compressor oils). AMSOIL PC Synthetic Compressor Oils have low friction properties and resist viscosity increase from oxidation. They help improve operating efficiency and save money on electrical energy consumption. AMSOIL PC Synthetic Compressor Oils are available in ISO 32, 46, 68, 100 and 150.
Product Code: PCH, PCI, PCJ, PCK and PCL

BUY IT NOW

AMSOIL Sirocco™ Synthetic Compressor Oil

AMSOIL SIROCCO® Synthetic Compressor Oil is recommended as a direct replacement for PAG compressor oils such as Sullair Sullube 32® and Ingersoll-Rand SSR Ultra-coolant®. (It is not recommended for use with Silicone base fluids). AMSOIL SIROCCO® Synthetic Compressor Oil is formulated with premium synthetic ester technology, and this high-quality, long-life fluid lasts several times longer in use than mineral-based oils. AMSOIL SIROCCO® Compressor Oil is fully formulated with nondetergent additives and is designed for use in rotary screw compressors and vacuum pumps. AMSOIL SIROCCO® Synthetic Compressor Oil is a multi-viscosity oil meeting the requirements of 5W-20, and may be used in applications calling for either an ISO-32 or ISO-46 compressor oil or coolant. It is recommended for use in single and multi-stage rotary screw compressors and vacuum pumps that call for this viscosity.
Product Code: SEI

BUY IT NOW

AMSOIL Synthetic Ester Compressor Oils

AMSOIL DC Synthetic Compressor Oils are long-life, premium compressor lubricants based on novel, proprietary technology. They improve compressor efficiency and extend drain intervals in reciprocating (piston) compressors and vacuum pumps where high discharge temperatures or carbon build-up are a concern. AMSOIL DC Synthetic Compressor Oils incorporate the highest quality, thermally-stable synthetic esters fortified with premium non-detergent, ashless additives for maximum protection at high temperatures and pressures where petroleum lubricants typically break down. The appropriate viscosity of AMSOIL DC Synthetic Compressor Oil is recommended
for use in rotary vane and reciprocating compressors and vacuum pumps. Drain intervals of 8,000 hours or more can be expected under normal operation. Available in ISO 100 and ISO 150.
Product Code: DCK, DCL

CALL US AT 800-745-5055 for PURCHASE INFORMATION

AMSOIL Synthetic Anti-Wear AW Series Hydraulic Oils

AMSOIL Synthetic Anti-Wear AW Series Hydraulic Oils protect hard-working hydraulic systems from the stress of high-pressure, high-load and heavy-duty operations. They remain fluid in cold temperatures for immediate cold-weather flow. Special anti-wear additives and rust inhibitors provide optimum protection to expensive equipment. AMSOIL Synthetic Anti-Wear AW Series Hydraulic Oils are shear-stable, long-life lubricants based on high-quality synthetic oil technology. These oils are formulated with a premium additive system that inhibits oxidation to prevent acid formation and viscosity increase and inhibit rust and foam (providing smooth hydraulic operation). AW Series Oils contain a very effective zinc-based antiwear/antioxidant additive which controls wear in high-speed, high-pressure vane and gear pumps while meeting the lubrication requirements of axial piston pumps with bronze-on-steel metallurgy. AMSOIL Synthetic Anti-Wear AW Series Hydraulic Oils meet the requirements for Maximum Efficiency Hydraulic Fluid (mehf) and can lower costs and/or increase productivity in mobile equipment by 6 to 15%. Available in ISO 15, 22, 32, 46 and 68.
Product Code: AWF, AWG, AWH, AWI and AWJ

BUY IT NOW 

 AMSOIL Biodegradable Hydraulic Oil ISO 46

Provides outstanding protection and high biodegradability. AMSOIL Biodegradable Hydraulic Oil is a premium performance hydraulic oil designed to biodegrade when subjected to sunlight, water and microbial activity. Manufactured with a high quality blend of oleic vegetable oils and customized synthetic esters, it meets the U.S. Federal bio-based procurement guidelines as defined in Section 9002 of the Farm Security and Rural Investment Act of 2002 (FSRIA). It exhibits high biodegradability and low aquatic toxicity, along with superior oxidative stability and low temperature performance. It contains anti-oxidants that ensure long oil life and foam inhibitors that promote problem-free operation. AMSOIL Biodegradable Hydraulic Oil is hydrolytically stable and ideal for use where water contamination is a problem, and should be used where high biodegradability and low aquatic toxicity are desired. Meets the stringent Vickers M-2950-S and I-286-S hydraulic oil specifications. Typical applications include construction, logging and farming equipment, lawn and turf care or anywhere leaking spills or ruptured hydraulic lines may present an environmental hazard.
Product Code: BHO

  AMSOIL Synthetic HV Series Multi-Viscosity Hydraulic Oil

    
AMSOIL Synthetic HV Multi-Viscosity Hydraulic Oil’s blend of high-viscosity-index base oils and performance additives provides all-season protection and reliable operation in all types of hydraulic systems. Its proven wear resistance and varnish-control deliver maximum hydraulic system performance and life. AMSOIL Synthetic Multi-Viscosity Hydraulic Oil is additionally tailored to promote energy efficiency and foam suppression. AMSOIL Multi-Viscosity Hydraulic Oil is designed for all-season use, since each viscosity covers a broad operating temperature range, helping eliminate seasonal oil changes. It is fortified with anti-varnish additives that chemically react with the building blocks of varnish, inhibiting its formation, and helps hydraulic systems remain clean and long-lasting. It meets the stringent viscosity retention requirements of Parker Hannifin (Denison) HF-0 and demonstrates excellent anti-wear performance and compatibility. The correct viscosity grade of AMSOIL Synthetic Multi-Viscosity Hydraulic Oil is recommended for high- and low-pressure gear, vane and piston stationary and mobile hydraulic systems, including those with bronze metallurgy. Available in ISO 22, 32, 46 and 68.
Product Code: HVG, HVH, HVI, HVJ

BUY NOW

AMSOIL Synthetic R&O/AW Gear, Bearing and Circulating Oils

AMSOIL Synthetic RC Series R&O/AW Gear, Bearing and Circulating Oils are formulated with high-quality synthetic base stocks and additive systems that effectively prevent wear and protect equipment by maintaining viscosity, resisting thermal and oxidative breakdown, preventing rust and resisting the degrading effects of water. AMSOIL Synthetic RC Series Oils are very shear-stable and oxidation-resistant, preventing viscosity loss from mechanical shear and viscosity increase from oxidation. AMSOIL Synthetic RC Series R&O/AW Gear, Bearing and Circulating Oils remain fluid at cold temperatures, providing easier startups, quick lubrication circulation and limiting the need for sump heaters. At higher temperatures, they maintain a thick lubricating film, reducing metal-to-metal contact and component wear. AMSOIL Synthetic RC Series R&O/AW Gear, Bearing and Circulating Oils are primarily recommended for gear and bearing applications and circulating systems requiring R&O and/or antiwear additive technology. Available in thirteen ISO viscosities from ISO 10 to ISO 1000.
Product Code: RCE through RCQ

BUY IT NOW

AMSOIL Synthetic Extreme Pressure (EP) Industrial Gear Oils

AMSOIL Synthetic Extreme Pressure (EP) SG Series Industrial Gear Oils are made from shear-stable, high-quality synthetic base oils and are fortified with additives that deliver high performance in industrial gear applications. These oils are designed to reduce maintenance costs by extending equipment life, extending drain intervals, and protecting against wear, pitting and rust. AMSOIL Synthetic Extreme Pressure (EP) SG Series Industrial Gear Oils are recommended for industrial applications operating under heavy loads and shock conditions and specifying an extreme-pressure lubricant. This includes, but is not limited to, enclosed industrial spur, bevel, herringbone, helical and worm gears (<200º F), chain drives, sprockets and most metal-on-metal systems requiring extreme-pressure additives. The AMSOIL Synthetic SG Series Gear Oils meet the AGMA ratings for synthetic gear oils and EP gear oils and are recommended for use in applications specifying these standards. AMSOIL Synthetic Extreme Pressure (EP) SG Series Industrial Gear Oils are compatible with mineral gear oils, synthetic gear oils (except PAG’s), and seals—making them easy to use.They preserve new seals, prevent leaks, and help rejuvenate old, brittle seals. Available in ISO 100, 150, 200, 320, 460 and 680.
Product Code: SGK, SGL, SGM, SGN, SGO and SGP

AMSOIL Synthetic HT Series High Temperature Lubricating Oils

AMSOIL Synthetic HT Series High Temperature Lubricating Oils are based on novel, proprietary technology, creating an antiwear product which incorporates the highest quality synthetic base fluids. AMSOIL HT Series Oils provide high operational temperature ranges and unbeatable thermal stability properties. The additive chemistry used provides excellent friction-reducing characteristics, and the synthetic base stocks are both thermally and chemically stable, virtually eliminating carbon formation in the recommended temperature ranges. AMSOIL Synthetic HT Series High Temperature Lubricating Oils are the primary recommendation for applications such as stentors, dryers, heat setting machines, tenter frames, oven conveyors and chains, or wherever a lubricant with exceptional high-temperature properties is required. Four ISO’s are available: 150; 220; 320 and 460, and are recommended for operational intermittent temperature ranges up to 500°F.
Product Code: HTL, HTM, HTN and HTO

BUY IT NOW 

AMSOIL Semi-Synthetic Slideway, Chain and Gear Lube

AMSOIL Semi-Synthetic Slideway, Chain and Gear Lube is a high-quality, heavy duty lubricant composed of synthetic base oils, large molecule petroleum base oils and additives specifically designed for EP applications found in gear, chain and machine tool applications. This combination of base oils and EP additives provides the excellent lubricity and film strength needed to prevent scoring and wear during equipment operations. By incorporating synthetic base oils, AMSOIL WLJ reduces friction for good overall performance. AMSOIL formulated AMSOIL Semi-Synthetic Slideway, Chain and Gear Lube with additives designed to prevent the stick/slip or chatter phenomena that commonly occur at the beginning and end of a machine tool stroke by using EP additives that form a hard boundary layer of protection and tackifying agents that improve the adhesion properties of the oil. These additives prevent stick/slip and wear. The tackifier agents used ensure the components have constant lubrication, allowing the EP additives to prevent rust. Additionally, AMSOIL Semi-Synthetic Slideway, Chain and Gear Lube  has excellent resistance to water washout. The semi-synthetic nature of WLJ delivers excellent performance in a wide variety of environments.
Product Code: WLJ

BUY IT NOW

AMSOIL Synthetic High Viscosity Lithium Complex Grease

AMSOIL Synthetic High Viscosity Lithium Complex Grease is excellent for use in heavy duty industrial and off road applications where equipment is working under adverse conditions such as exposure to environmental elements, slow, heavily-loaded applications and shock-loading conditions. Use this synthetic grease in wet applications requiring excellent water resistance and in high temperature applications up to 350°F continuous service and 400°F intermittent service. AMSOIL Synthetic High Viscosity Lithium Complex Grease is excellent for use in heavy duty industrial and off road applications where equipment is working under adverse conditions such as exposure to environmental elements, slow, heavily-loaded applications and shock-loading conditions.
Product Code: GVC

BUY IT NOW

AMSOIL Synthetic Extreme Pressure (EP) Semi-Fluid 00 Grease

AMSOIL Synthetic EP Semi-Fluid 00 Grease is a lithium complex semifluid grease (NLGI 00) formulated with high-viscosity ISO-460 synthetic base oils. Coupled with a sophisticated additive package, AMSOIL Synthetic EP Semi-Fluid 00 Grease coats and reacts to metal surfaces, providing an unparalleled protection system that reduces wear and prevents damage. A problem-solving lubricant ideal for leaky gear boxes in industrial and fleet applications and for use in applications that are difficult to service, it is primarily used in grease-filled cases where conventional semifluid greases do not provide adequate lubricant life or protection.
Product Code: GSF

BUY IT NOW

 AMSOIL Synthetic Polymeric Off-Road Grease NLGI #1 and #2, 5% Moly     

 AMSOIL Synthetic Polymeric Off-Road Grease combines an over-based calcium-sulfonate complex thickener and proprietary synthetic polymeric technology to provide outstanding performance in heavy duty off-road applications. AMSOIL developed an exclusive synthetic polymeric system custom-built to provide performance benefits specific to off-road equipment. This synthetic technology helps give AMSOIL Off-Road Grease tenacious cling ability and maximum pound-out resistance over extended service intervals, even in wet environments. AMSOIL Synthetic Polymeric Off-Road Grease is heavily fortified with moly for maximum wear protection to meet Caterpillar’s requirement for pin and bushing applications. Its high Timken OK load and excellent four-ball wear and four-ball weld test results are proof of its exceptional load-bearing capacity. Field test results show that AMSOIL Synthetic Polymeric Off-Road Grease reduces grease consumption by up to 50 percent. That allows operators to either maintain their current maintenance schedule and use up to 50 percent less grease per application, or extend the length of time between re-greasings by up to 50 percent. Its superior pound-out resistance combined with extended service intervals and superior protection result in reduced lubricant, labor and equipment-replacement costs. Available in NLGI #1 and NLGI #2.
Product Code: GPOR1, GPOR2

AMSOIL Synthetic Polymeric Truck, Chassis & Equipment Grease 

AMSOIL Synthetic Polymeric Truck, Chassis and Equipment Grease (NLGI #1 and NLGI #2) delivers excellent wear protection and extreme-pressure performance over extended service intervals in medium- and heavy-duty applications. It combines select base oils, proprietary synthetic polymeric chemistry, an advanced additive package and a lithium-complex thickener for excellent impact resistance, reliable contaminant control and maximum longevity. AMSOIL Truck, Chassis and Equipment Grease clings tenaciously to metal surfaces, helping to keep rain, snow and other corrosive contaminants from penetrating greasable components. It is formulated with an advanced additive package designed to combat the harmful effects of roadway contaminants, helping components last longer and saving fleets money. AMSOIL Synthetic Polymeric Truck, Chassis and Equipment Grease is recommended for heavy-duty over-the-road tractors and trailers, delivery fleets, dump trucks, refuse haulers, utility fleets, emergency service vehicles, sewer and septic trucks, snow removal vehicles, wreckers, municipal service vehicles, equipment haulers, cement mixer trucks, airport support vehicles and more. In addition, its long service life reduces the need for frequent re-application (or requires less grease at each servicing), reducing maintenance costs.
Product Code: GPTR1 and GPTR2

BUY IT NOW

AMSOIL Synthetic Multi-Purpose Grease

Reformulated with calcium sulfonate complex thickeners to provide even better protection and performance. The new thickener allows AMSOIL Synthetic Multi-Purpose Grease to provide improved extreme-pressure properties, corrosion resistance, oxidation resistance, high-temperature stability and water resistance at the same price as the previous formulations. AMSOIL Synthetic Multi-Purpose Grease is qualified against the highest grease standards and designed for multiple-use applications. Composed of premium-quality synthetic base oils and calcium sulfonate complex thickeners, Multi-Purpose Grease provides exceptional film strength, shear resistance, adhesion properties and mechanical stability. It excels in temperature extremes by providing excellent oxidation stability, high-temperature dropping point and low-temperature torque value and pumping capability. AMSOIL Synthetic Multi-Purpose Grease is formulated with oil soluble extreme-pressure additives for heavy loads, as well as oxidation and corrosion inhibitors.
Product Code: GLC

BUY NOW

AMSOIL Synthetic Extreme Pressure (EP) Multi-Purpose Lithium Complex Spray Grease

The same high performance characteristics of AMSOIL Synthetic Extreme Pressure (EP) Multi-Purpose Lithium Complex Grease in a convenient spray can. Now you can grease where you cannot reach! This grease is composed of synthetic base oils and lithium complex thickeners that provide the film strength, shear resistance and mechanical stability needed to excel in high and low operating temperature ranges by providing excellent oxidation stability, high temperature dropping points, good low temperature torque values and good low temperature pumping capabilities. Highly water washout resistant. AMSOIL Synthetic Multi-Purpose Grease in a convenient spray can. NLGI #2 GC/LB.
Product Code: GLCSC

AMSOIL Synthetic Stationary Natural Gas Engine Oil

 MSOIL Synthetic Stationary Natural Gas Engine Oil delivers continuous protection in stationary natural gas engines calling for an SAE 40, low-ash lubricant. Its shear-stable formula qualifies it as a multi-grade 20W-40 so it can be used over a broad ambient temperature range, eliminating the need for seasonal oil changes. AMSOIL Synthetic Stationary Natural Gas Engine Oil is formulated with low sulfated ash to minimize carbon deposits and port blockage, resulting in reduced maintenance and extended equipment life. Advanced anti-wear and anti-scuff protection helps control valve recession and wear on piston rings, cylinder liners and bearings during continuous severe-service operation in stationary natural gas engines. May be used for extended drain intervals when monitored by an oil analysis program. Should NOT be used in automotive engines or vehicular engines that run on propane or natural gas: see AMSOIL Synthetic Vehicular Natural Gas Engine Oil (ANGV) for these applications.
Product Code: ANGS

AMSOIL Synthetic Vehicular Natural Gas Engine Oil

AMSOIL Synthetic Vehicular Natural Gas Engine Oil delivers superior protection and performance in natural gas engines calling for an API CF 15W-40 low-ash lubricant. It is formulated specifically to meet the special requirements of natural gas fueled engines used in vehicles and mobile equipment. AMSOIL Synthetic Vehicular Natural Gas Engine Oil has an advanced anti-wear additive system to provide enhanced valve train protection, whether roller or slider followers are used. It is formulated with high levels of zinc and phosphorus to provide outstanding wear protection in mobile engine requiring Cummins CES 20074. AMSOIL Synthetic Vehicular Natural Gas Engine Oil minimizes deposits and valve recession, maintain viscosity, and may be used for extended drain intervals when monitored by an oil analysis program. This product is recommended in mobile applications fueled by compressed natural gas (CNG), liquefied natural gas (LNG) or liquefied petroleum gas (LPG), including transit buses, medium/heavy duty trucks, refuse haulers, school buses and delivery trucks, and for applications where Cummins CES 20074 is required.
Product Code: ANGV

AMSOIL Heavy-Duty Bypass Filter System

The new AMSOIL Heavy-Duty Bypass Filtration System (BMK30 and EaBP120) offers maximum by-pass filtration performance for heavy-duty applications. The AMSOIL BMK30 bypass filter mount is made from high-quality cast aluminum with a steel filter spud that has been thoroughly tested in on-road and severe off-road service. It is finished with a thick layer of powdercoated paint to provide maximum resistance to the degrading effects of road salt, debris and engine compartment chemicals. In addition, AMSOIL Heavy-Duty Bypass Filtration Systems can be plumbed in a series to provide maximum filtration protection for large V12 and V16 engines. The AMSOIL BMK30 Heavy-Duty Bypass System and EaBP120 Ea Bypass Filter provide maximum filtration performance for virtually all heavy-duty diesel applications, including Class 6, 7 and 8 heavy-duty trucks, off-road equipment, buses, generators, marine engines, logging and agricultural equipment. AMSOIL recommends changing the EaBP120 every other full-flow filter change up to 90,000 miles.Extended oil drain intervals should always be accompanied by an oil analysis program.
Product Code: BMK30

BUY IT NOW

AMSOIL Dual-Gard™ Bypass Filter System

This high performance unit consists of two (2) AMSOIL EaBP Absolute Efficiency Bypass Filters mounted on an A380 aluminum alloy mounting block. AMSOIL EaBP Bypass Filters have an efficiency of 98.7 percent (Beta 75) at TWO microns, which means absolute efficiency at 2 microns. The AMSOIL Dual-Gard™ By-Pass Oil Filtration System treats oil to ultrafine filtration, which increases engine and oil life and enhances engine performance for heavy duty diesel engines. Wear tests have shown particles of contamination in the sub-micron to 20 micron range are most harmful to rings and bearings. These filters remove 39% of soot contaminants less than one micron, virtually all contaminants 2 microns and larger, and are considered SRD’s (soot removal devices). For sump capacities of 15 to 42 quarts.
Product Code: BMK22

BUY IT NOW

Donaldson® Endurance™ Air and Oil Filters with Synthetic Nanofiber Media

Donaldson® Endurance™ air and oil filters, available through AMSOIL, provide the highest level of filtration efficiency in the industry for heavy equipment. Specifically designed for on-road, heavy-duty class 6, 7 and 8 vehicles,Donaldson® Endurance™ air and oil filters feature exclusive nanofiber technology. Class 6 vehicles, 19,501 to 26,000 pounds gross vehicle weight (GVW), include single-axle vans, beverage trucks and school buses; class 7, 26,001 to 3,000 pounds GVW, include refuse trucks, tow trucks and city transit buses; class 8 trucks, 33,000 pounds GVW and greater, include fuel haulers, inter-city/tour buses and cement trucks. Donaldson® Endurance™ synthetic air and oil filters and AMSOIL synthetic lubricants together deliver unrivaled protecion, longer engine life and reduces maintenance costs for on-highway trucks, vans and buses in classes 6.7 and 8 for fleets across the nation.
Product Code: EAF and ELF

BUY IT NOW

Donaldson® P-Series Filters

Increased engine emissions control and tighter tolerances within the engine require high efficiency filters. Donaldson P-Series Lube Filters are constructed with full synthetic or synthetic blend media for high efficiency. Donaldson P-Series Air Filter media is made up of specially formulated fibers designed to trap contaminants such as dust, dirt and soot before they reach the engine. Donaldson has developed an extensive range of air filter media to provide the best engine protection no matter what the operating conditions. Using the same particle size contaminant, for every eight grams of dirt passed through a Luber-finer filter, the Donaldson filter passed only two grams. Donaldson Coolant Filters, Fuel Filters and Hydraulic Filters are also available from AMSOIL.
Product Code: PSERIES

BUY IT NOW

WIX Filters

To complement the Ea line of filters, AMSOIL now offers WIX filters, allowing one-stop shopping for automotive customers. WIX is well-known around the world for its innovative filtration products for the automotive and light truck market. AMSOIL carries over 700 WIX air, oil, fuel, racing and transmission filters for automotive and light truck applications. This includes not only standard air and oil filters, but fuel, transmission, cabin air and filters specially designed for racing as well. Today WIX manufactures some of the best air, lube, cabin air, fuel crank case breather and transmission filtration products on the market. The company is also widely known for its support of NASCAR. AMSOIL will carry all WIX racing filters.
Product Code: WIX

BUY IT NOW

WIX AquaChek® Air Drying Filter

The first fully engineered filter of its kind, the WIX AquaChek® air drying filter eliminates the passthrough of free water from air compressors to tools and equipment. WIX AquaChek® air drying filters provide unsurpassed protection from water, rust and corrosion. The super-absorbent polymer fibers that make up the media are pleated and inserted into a spin-on filter housing. As water molecules come in contact with the polymer, they react with it to form a molecular bond that never releases. The revolutionary polymer filtration technology and spin-on installation of WIX AquaChek® filters set a new standard for compressed air moisture control.
Product Code: ACK

BUY IT NOW